PoolsKSA pool company
  1. Home
  2. Pool Construction
  3. Pool Excavation & Structure

Our services

Pool Excavation & Structural Works in Riyadh

The structure is the most important part of a pool and is hidden after finishing. Proper excavation, rebar, concrete and waterproofing mean a pool that does not leak or crack.

What is included

  • Survey and level setting
  • Excavation and spoil removal
  • Rebar to the design
  • Water-resistant reinforced concrete
  • Structural waterproofing
  • Under-slab plumbing before the pour
Every project starts with a free site visit and condition report, followed by an itemised quote and timeline.
Pool Excavation & Structural Works in RiyadhPool Excavation & Structure

Why PoolsKSA

Engineer-supervised

An engineer oversees every stage from site visit to handover.

Free site visit

We visit, inspect and give you a condition report with no obligation.

Clear quote

An itemised quote with no hidden costs or later surprises.

Workmanship warranty

A real warranty on workmanship and finishes.

On schedule

A clear timeline and handover on the agreed date.

After-handover support

Our team stays with you after handover for any issue or maintenance.

A practical guide to pool excavation and structure

Why the structure matters most

After handover you see mosaic, lights and clear water. You never see the rebar, the concrete or the waterproofing, yet those decide whether the pool lasts for years without leaks or starts giving trouble in its first summer. A structural mistake can only be fixed later by breaking out finished work.

Structural works cover everything from the first cut of the excavator to a waterproofed, water tested concrete shell ready for finishing. Whether you are planning a villa pool, a large farm pool or a rooftop pool, this stage needs engineering supervision and clear drawings. Our pool construction page shows the whole journey. Here we focus on what sits beneath the tiles.

Checking the site and the ground

Before any machine arrives, an engineer walks the site. We fix the exact position of the pool, take levels and look at what surrounds it.

  • Ground type. Parts of Riyadh are rocky and need breaking. Other plots sit on old fill or loose sand that must be compacted.
  • Groundwater. In the Eastern Province the water table can be close to the surface and pushes on the shell from outside.
  • Salt and humidity in coastal cities such as Jeddah and Jubail, which attack rebar if the concrete cover is thin.
  • Distance from villa foundations, boundary walls, underground water tanks, septic tanks and cables.
  • Regional ground. Around Madinah some plots sit on hard volcanic rock. In Abha, sloping sites often need retaining walls. Farms in Qassim and Al Kharj can change from sand to clay within the same plot.
  • Access width. Some villas have narrow gates, so we plan smaller machines or hand digging in places.

If the ground is in doubt, we ask for a soil test before design. It is far cheaper than a surprise halfway down the hole.

Excavation and spoil removal

We set out the pool on the ground from the drawings. The dig is a little wider than the pool to leave room for formwork and any external waterproofing, and deep enough for the deepest point plus the floor slab and layers beneath it.

The depth profile is shaped during the dig a shallow zone for children and seating, a deeper zone for swimming, and a gradual slope between them rather than a sudden drop. Because that profile is fixed before concrete, we review it with you before we start.

If we hit rock, we break it with suitable equipment without shaking the villa foundations. Near walls and footings we support the sides of the excavation so the soil does not slump. If groundwater appears, pumps keep the hole dry until the pour and waterproofing are complete. In residential streets we time truck movements sensibly and keep the road outside your gate clean. Spoil leaves the site rather than sitting in your yard, and in summer we schedule work for the cooler hours for the crew's safety and the quality of the work.

The base and the rebar

After digging we compact the bottom and pour a thin layer of plain blinding concrete. It gives a clean, level surface for the steel and keeps soil out of the structural concrete.

Rebar follows the structural design, usually two layers of mesh in the floor and walls. The detail that matters most is concrete cover, the distance between the steel and the face of the concrete. We hold it with chairs and concrete spacers so steel never touches soil or formwork. Too little cover lets moisture reach the steel, which rusts, expands and cracks the concrete over time.

Steps, benches, weir walls and balance tank walls all carry their own reinforcement. The engineer inspects the steel before every pour, and as the owner you are entitled to see it before it disappears.

Everything that goes in before the pour

Every pipe and opening that passes through the shell must be in place before concrete arrives. Anything cut in later is a weak point and a likely leak. Before each pour we check

Each pipe through the wall gets a sleeve with a water seal, and the pipework is pressure tested before the pour.

Pouring and curing in the heat

Pool concrete is a mix suited to water-retaining structures, with a controlled water content. During the pour we vibrate it so it fills every gap around the steel. Honeycombing, the voids left when concrete is not compacted, gives water a path straight through.

We keep construction joints to a minimum, and where one is unavoidable we fit a waterstop. Untreated joints are among the most common leak points in older pools.

Riyadh's hot, dry air pulls water out of fresh concrete fast, and concrete that dries too quickly develops fine cracks. In summer we pour early in the morning or around sunset, then keep the concrete wet and covered for the curing period the engineer sets. We do not rush into the next stage before it is ready.

Waterproofing and the water test

Even good concrete needs waterproofing. We apply a pool-grade system inside the shell, with extra care at corners and around every pipe and light. Where there is groundwater or damp soil we also waterproof the outside, protecting the structure from both directions.

Then we fill the pool and watch the level. If it drops beyond normal evaporation, the cause is found and fixed now. Tiling does not start until the shell passes. If the test fails, we locate the leak, repair it and test again. That rule is what lets the tiling and finishing stage go on with confidence.

Backfill, balance tanks and the plant room

Once the shell passes, we backfill the gap between the wall and the ground in layers, compacting each one. Uncompacted backfill settles, and the deck around the pool sinks and cracks months later.

Infinity and overflow pools need a concrete balance tank built and waterproofed to the same standard, because it is always full. The plant room needs a solid floor, drainage and ventilation so pumps and filters last, and it should sit close to the pool with easy access for servicing. Finally, the deck base is laid with falls that carry rain and splash water away from the pool.

Special cases we handle

  • Rooftop pools. No digging, but a structural study of the slab and heavier waterproofing.
  • Occupied, finished villas. We plan routes for machines and spoil and protect entrances and floors.
  • Old pools with a tired shell. Sometimes repair is enough and sometimes a rebuild is needed. See pool renovation.
  • Contractors or owners who want the shell only. We can excavate, pour and waterproof, then hand over a tested shell ready for finishing.

What drives cost, and how to start

There is no fixed rate for excavation and concrete. Cost moves with

  1. Pool size, depth and shape. Curves take more formwork and labour.
  2. Ground conditions, including rock or groundwater.
  3. Site access and spoil removal.
  4. Quantities of steel and concrete in the structural design.
  5. The pool system, and whether there is a balance tank or overflow channel.
  6. The waterproofing system, inside only or inside and out.

During construction, a few signs tell you the work is on track. The engineer is present for steel inspection and the pour. Rebar sits on chairs and spacers, never on the soil. Pipes are pressure tested before concrete. Fresh concrete is kept wet and covered. The water test happens before tiling and you see the result. If any of these is missing, ask why.

Send photos and your location on WhatsApp. We arrange a visit and give you a written, itemised quote. Visits are free inside Riyadh, and in other cities we arrange them with you, as shown on our service areas page. You can also read why owners trust us or go straight to the contact page.

FAQ

What happens if we hit rock?
We break it with suitable equipment while protecting the villa foundations. Rock adds excavation work but gives a stable base, and we try to spot it during the visit so it is in the quote.
Does groundwater rule out a pool?
No, it changes the method. We pump the dig dry during work, waterproof the shell inside and out, and design the floor to resist upward pressure.
Can the pool sit close to the villa wall?
Usually yes, at a distance the engineer sets after checking foundation depth and soil. The excavation sides are supported so the footing is not disturbed.
Can you build only the shell?
Yes. We can hand over a waterproofed, water tested shell, with the warranty covering the work we carried out as set in the contract.
Why water test before tiling?
A leak found at this stage is easy to fix. Found after tiling, it means breaking out finishes and a much bigger bill.
How long does pool construction take?
Usually 6 to 10 weeks for a concrete pool depending on size, system and finishes. You get a clear timeline with the quote.
How much does a pool cost?
It depends on size, depth, system (skimmer, overflow or infinity), finish level and extras. That is why we offer a free site visit and an itemised quote.
Is the site visit really free?
Yes. The site visit and quote are free in Riyadh with no obligation. In other cities we arrange the visit with you and explain the details when you contact us.
Do you offer a warranty?
Yes, we provide a warranty on workmanship and waterproofing, with duration and terms set out in the contract.

Free site visit

Request a free quote

Fill in your details and WhatsApp opens with a ready message to our team to arrange your site visit.

We keep your details only to follow up on your request and never share them. Privacy policy